Have you received a letter from your water system? Click here to learn more
PURCommunity.comContact UsWarranty Registration

Contaminant Comparison Chart

For a complete list of contaminants that PUR filters reduce, please view our Performance Data Sheets here.

 

 

 

PUR & PUR PLUS FAUCET FILTERS
RF3375/RF9999

View Filters

PUR PLUS PITCHER FILTERS
PPF951K

View Filter

PUR BASIC PITCHER FILTERS
PPF900Z

View Filter

 

Vs. Brita*
Lead ✓ ✓
Microplastics ✓ ✓
Mercury ✓ ✓ ✓
Chlorine Taste & Odor ✓ ✓ ✓
DEET ✓
TTHM ✓

PUR’s Filtration Systems Are Certified By NSF And WQA For Their Contamination Reduction. WQA certifications as of 5/27/21 for Faucet filter models RF-3375 and RF-9999.

¹ Certified to reduce 10X more chemical and physical substances than Brita’s® leading pitcher filter.
² Certified to reduce 3X more chemical and physical substances than Brita’s® leading pitcher filter.
³ Certified to reduce 2X more chemical and physical substances than Brita’s® leading pitcher filter.
*Versus best-selling Brita® pitcher filter OB03. Brita® is a trademark of Brita LP.
**Like other leading brands, PUR does not filter microbes. As of 3/1/23 Brita® and ZeroWater® were not certified to filter microbes. Brita® is a trademark of Brita LP. ZeroWater® is a trademark of Zero Technologies, LLC..

 

PUR & PUR PLUS FAUCET FILTERS

 

 

 

PUR & PUR PLUS FAUCET FILTERS
RF3375/RF9999

View Filters
 

Vs. Brita*
Lead ✓
Microplastics ✓
Mercury ✓
Chlorine Taste & Odor ✓
DEET ✓
TTHM ✓

PUR’s Filtration Systems Are Certified By NSF And WQA For Their Contamination Reduction. WQA certifications as of 5/27/21 for Faucet filter models RF-3375 and RF-9999.

¹ Certified to reduce 10X more chemical and physical substances than Brita’s® leading pitcher filter.
² Certified to reduce 3X more chemical and physical substances than Brita’s® leading pitcher filter.
³ Certified to reduce 2X more chemical and physical substances than Brita’s® leading pitcher filter.
*Versus best-selling Brita® pitcher filter OB03. Brita® is a trademark of Brita LP.
**Like other leading brands, PUR does not filter microbes. As of 3/1/23 Brita® and ZeroWater® were not certified to filter microbes. Brita® is a trademark of Brita LP. ZeroWater® is a trademark of Zero Technologies, LLC..

 

PUR PLUS PITCHER FILTERS

 

 

PUR PLUS PITCHER FILTERS
PPF951K

View Filter

 

Vs. Brita*
Lead ✓
Microplastics ✓
Mercury ✓
Chlorine Taste & Odor ✓
DEET
TTHM

PUR’s Filtration Systems Are Certified By NSF And WQA For Their Contamination Reduction. WQA certifications as of 5/27/21 for Faucet filter models RF-3375 and RF-9999.

¹ Certified to reduce 10X more chemical and physical substances than Brita’s® leading pitcher filter.
² Certified to reduce 3X more chemical and physical substances than Brita’s® leading pitcher filter.
³ Certified to reduce 2X more chemical and physical substances than Brita’s® leading pitcher filter.
*Versus best-selling Brita® pitcher filter OB03. Brita® is a trademark of Brita LP.
**Like other leading brands, PUR does not filter microbes. As of 3/1/23 Brita® and ZeroWater® were not certified to filter microbes. Brita® is a trademark of Brita LP. ZeroWater® is a trademark of Zero Technologies, LLC..

 

PUR BASIC PITCHER FILTERS

 

 

 

PUR BASIC PITCHER FILTERS
PPF900Z

View Filter

 

Vs. Brita*
Lead
Microplastics
Mercury ✓
Chlorine Taste & Odor ✓
DEET
TTHM

PUR’s Filtration Systems Are Certified By NSF And WQA For Their Contamination Reduction. WQA certifications as of 5/27/21 for Faucet filter models RF-3375 and RF-9999.

¹ Certified to reduce 10X more chemical and physical substances than Brita’s® leading pitcher filter.
² Certified to reduce 3X more chemical and physical substances than Brita’s® leading pitcher filter.
³ Certified to reduce 2X more chemical and physical substances than Brita’s® leading pitcher filter.
*Versus best-selling Brita® pitcher filter OB03. Brita® is a trademark of Brita LP.
**Like other leading brands, PUR does not filter microbes. As of 3/1/23 Brita® and ZeroWater® were not certified to filter microbes. Brita® is a trademark of Brita LP. ZeroWater® is a trademark of Zero Technologies, LLC..

 

7 Best Scaffold Jack Base Options for Global Buyers

Choosing the right Scaffold Jack Base is a practical safety decision, not merely a price comparison.
A stable base supports load transfer, leveling, and safer adjustment on uneven ground.
Small details matter.
Thread quality, plate thickness, pin design, and corrosion protection can affect daily performance.
The International Labour Organization reported approximately 2.93 million work-related deaths worldwide each year in its 2023 safety report.
Construction remains one of the most exposed industries.
In the United States, OSHA recorded 395 fatal construction falls among 1,069 construction deaths in 2022.
These figures do not prove that every incident involves faulty equipment.
They do show why reliable scaffold components deserve careful evaluation.

This guide compares seven Scaffold Jack Base options for global buyers.
The review considers adjustment range, working load information, material quality, compatibility, surface treatment, and supplier documentation.
Relevant references include EN 12811-1, BS 1139, AS/NZS 1576.1, and applicable local requirements.
Standards may differ between markets.
A product suitable for one project may require additional verification elsewhere.
Buyers should request test reports, traceable material records, installation guidance, and clear load tables.
Experienced contractors also inspect threads before assembly and check base plates after transport.
A clean thread is not a luxury.
It can determine whether adjustment remains smooth under demanding site conditions.
No shortlist is perfect.
Manufacturers sometimes publish incomplete data, and buyers may overlook ground conditions.
Therefore, the final choice should combine documented performance, professional judgment, and site-specific engineering review.

7 Best Scaffold Jack Base Options for Global Buyers
Table of Contents [Hide]
1 Scaffold Jack Base: Definition, Purpose, and Main Components
2 How to Compare Seven Scaffold Jack Base Options
3 Load Capacity, Adjustment Range, and Material Quality
4 Safety Standards, Compatibility, and Installation Requirements
5 Choosing the Right Jack Base for Different Global Projects

Scaffold Jack Base: Definition, Purpose, and Main Components

A scaffold jack base is an adjustable support used beneath a scaffold standard. It helps workers level the structure on uneven ground. The base transfers vertical loads toward the supporting surface. It also improves stability when platform heights need precise adjustment.

A typical jack base includes a threaded steel stem, a welded or cast base plate, and an adjustment collar. Some designs include a locking pin or retaining mechanism. The thread allows controlled height changes, while the plate spreads pressure across timber, concrete, or another approved support.

A swivel head can improve contact on sloped surfaces, but it requires careful inspection. Small gaps matter.

In practical site checks, buyers should examine thread quality, weld consistency, plate thickness, and corrosion protection. The stem should turn smoothly without excessive looseness. The collar must hold its position under the specified working load. Always compare dimensions with the scaffold system and follow the supplier’s load data. A larger plate is not automatically safer. Ground bearing capacity still matters.

For global buyers comparing seven jack base options, useful categories include fixed plates, swivel plates, U-head supports, heavy-duty models, compact models, galvanized versions, and fine-adjustment designs. Each option suits different ground conditions and load requirements.

One overlooked issue is transport damage. Bent threads can appear minor, yet they may prevent reliable adjustment. When uncertain, replace the part rather than forcing it into service.

How to Compare Seven Scaffold Jack Base Options

How to Compare Seven Scaffold Jack Base Options

Seven options deserve separate checks: fixed base plates, adjustable screw jacks, U-head jacks, swivel bases, castor bases, fork heads, and integrated leveling bases. Do not compare price alone. Measure adjustment range, thread diameter, base footprint, steel grade, corrosion protection, and locking method. OSHA 29 CFR 1926.451 requires supported scaffolds to carry their weight and four times the maximum intended load. That four-times rule is a screening point, not a substitute for engineered design. The WHO/ILO Joint Estimates published in 2023 reported 2.93 million annual deaths linked to work-related factors globally. That figure is sobering.

Fixed plates suit firm, level slabs, but they offer little correction for unevenness. Adjustable screw jacks provide height control; check exposed thread, nut engagement, and visible deformation. U-heads distribute ledgers or stringers differently, so contact width matters. Swivel bases help on slopes, yet hinge wear can create movement.

Castor bases improve mobility, but wheel locks need site verification. Fork heads and integrated leveling bases may speed erection, though unusual dimensions can complicate global replacement. Some catalogs blur these categories.

For international purchasing, request test reports, batch traceability, coating thickness, and declared working loads. Compare the working load at the actual extension, not the headline capacity. Check metric and imperial threads. EN 12811-1 covers temporary works equipment performance and design principles, while local rules may impose stricter requirements. Ask whether testing included vertical compression, eccentric loading, or repeated adjustment. I would inspect ten samples because one clean photograph proves very little. That step costs time. Yet it may expose loose nuts, poor welds, or misleading tolerances before shipment.

Load Capacity, Adjustment Range, and Material Quality

7 Best Scaffold Jack Base Options for Global Buyers

Load Capacity, Adjustment Range, and Material Quality

For global buyers, the seven practical scaffold jack base options include fixed, swivel, U-head, heavy-duty, telescopic, wide-plate, and locking-collar designs. Fixed bases suit level concrete slabs. Swivel bases help manage mild ground slopes. U-head models support frames, beams, and ledger systems. Telescopic jacks speed up positioning, while wide plates reduce ground pressure. However, “heavy-duty” is not a universal rating. European Standard EN 12811-1 defines scaffold load classes from 0.75 to 6.00 kN/m². Buyers should match the jack’s tested working load with the complete scaffold design.

Adjustment range matters during uneven installation. A longer threaded section offers flexibility, but excessive exposed thread can reduce stability. Practical selection should include the minimum height, maximum extension, thread diameter, collar design, and locking method. A 450 mm range may be useful on mixed-level floors, but only when the manufacturer confirms its safe working load throughout that range. OSHA 29 CFR 1926.451 requires scaffold components to support their own weight and at least four times the maximum intended load. This rule does not replace engineering calculations.

Material quality also needs evidence. Hot-dip galvanized steel can improve corrosion resistance; ISO 1461 specifies coating requirements based on steel thickness. Inspectors should check weld continuity, thread accuracy, plate deformation, and visible rust. A polished surface is not proof of strength. I would request batch test certificates, dimensional drawings, and independent load-test records. Catalog tables are helpful, but they can still hide assumptions.

Safety Standards, Compatibility, and Installation Requirements

7 Best Scaffold Jack Base Options for Global Buyers

Choosing a scaffold jack base is a safety decision, not a catalog preference. The seven practical options include fixed soleplate, swivel base, U-head jack, fork-head jack, heavy-duty jack, adjustable base, and galvanized outdoor jack. Each must match the scaffold tube diameter, thread size, load rating, and frame system. A loose fit can create movement at the base. That detail is often underestimated.

OSHA estimates that about 2.3 million construction workers use scaffolds, with approximately 4,500 injuries and 50 deaths reported annually from scaffold-related incidents. HSE recorded 51 fatal injuries in Great Britain’s construction sector during 2023/24, with falls remaining a major hazard. These figures support strict installation controls. Buyers should verify compliance with OSHA 1926.451, EN 12811-1, or AS/NZS 1576, depending on the work location. Product certificates should show thread quality, plate dimensions, weld inspection, and tested safe working load.

Installation begins on firm, level ground. Use sole boards where soil may settle. Keep the screw spindle engaged within the manufacturer’s marked adjustment range. Check that the base plate sits fully flat, with no visible bending or damaged threads. A swivel jack can help on uneven surfaces, but it cannot correct unstable foundations. In field inspections, small height differences often cause larger frame alignment problems. I would also recheck every jack after the first shift, because initial settlement is easy to miss.

7 Best Scaffold Jack Base Options for Global Buyers – Safety Standards, Compatibility, and Installation Requirements

Option Typical Configuration Best Application Compatibility Typical Adjustment or Size Range Key Safety Standards and References Installation Requirements Important Buying Checks
1. Fixed Base Plate Welded or formed steel plate with a central locating pin or socket. Stable scaffolds erected on level, load-bearing surfaces where no height adjustment is required. Compatible with tube-and-fitting scaffold standards when the plate socket matches the outside diameter and connection method of the vertical tube. Common plate footprints are approximately 120–180 mm square or round; dimensions vary by system design. Use within a scaffold system designed and checked in accordance with EN 12811-1, applicable national regulations, and the system supplier’s instructions. Place every plate on a sound, level sole board or engineered support surface. Keep the plate fully supported and align the standards vertically. Confirm plate thickness, weld quality, socket dimensions, corrosion protection, and the tested load rating of the complete scaffold system.
2. Adjustable Screw Jack Base Threaded vertical spindle, base plate, adjustment nut, and retaining or locking component. Leveling scaffolds on uneven ground or correcting small differences in floor elevation. Suitable for tube-and-fitting, ring-lock, cuplock, frame, and other modular systems only when the spindle diameter, nut, and connector are system-compatible. Typical adjustment ranges are about 300–600 mm; the usable range must be limited by the manufacturer’s marked extension limit. Relevant design and use principles include EN 12811-1, EN 74 connection requirements where applicable, OSHA 29 CFR 1926.451 in the United States, and local scaffold regulations. Use a level sole board or engineered base. Do not exceed the permitted exposed spindle length. Tighten the adjustment nut and prevent lateral movement. Check thread form, spindle diameter, base dimensions, locking method, corrosion resistance, and verified axial load capacity at the intended extension.
3. U-Head Adjustable Jack Adjustable threaded jack fitted with a U-shaped head for supporting beams, ledgers, bearers, or formwork members. Temporary propping, shoring, slab support, and applications where the supported member must sit securely in a cradle. Compatible with scaffold tubes, timber beams, steel bearers, and modular shoring towers when the U-head width and load path are suitable. Typical spindle adjustment is approximately 300–600 mm; U-head widths commonly range from about 100–165 mm. Use with an engineered temporary-works design and applicable requirements such as EN 12811-1, EN 1065 where telescopic props are used, or local shoring regulations. Center the supported member in the U-head, maintain full bearing, secure against displacement, and install the tower or prop on a level, load-bearing base. Verify U-head depth, saddle width, spindle extension limit, locking arrangement, and the rated load for the complete assembled support.
4. Swivel or Tilting Base Plate Base plate mounted on a pivot or spherical joint to accommodate limited slope or angular alignment. Scaffolds erected on sloping terrain, ramps, irregular concrete, or structures where a rigid flat plate would not sit evenly. Compatible only with scaffold systems and sole boards designed to accept the specific swivel base geometry and load direction. Common angular compensation is approximately 5–15 degrees, depending on design; the exact angle must be confirmed before purchase. Apply EN 12811-1 and local requirements for foundation stability, load transfer, bracing, and scaffold erection. Use a properly sized sole board or engineered foundation. Ensure the joint is correctly oriented, fully seated, and restrained from sliding or rolling. Check permitted angle, locking mechanism, contact area, joint strength, and whether the rated capacity changes when the base is inclined.
5. Fork-Head Jack Base Adjustable jack with a forked or saddle-shaped head for receiving horizontal scaffold members or shoring bearers. Shoring towers, falsework, temporary beam support, and load-bearing platforms requiring positive member positioning. Works with modular scaffold towers and shoring frames when the fork width, connector type, and vertical load path match the system. Typical adjustment ranges are approximately 300–600 mm; fork openings often fall within about 80–150 mm. Use an engineered design based on EN 12811-1, applicable temporary-works guidance, and national requirements for stability and load capacity. Seat the bearer centrally in the fork, prevent uplift or sideways displacement, and install diagonal bracing where required by the design. Confirm fork opening, head depth, spindle extension, locking nut, weld inspection, and tested capacity under eccentric loading.
6. Caster Jack Base Lockable caster assembly combined with a jack or leveling mechanism for mobile scaffold towers. Mobile access towers used on smooth, firm, unobstructed indoor or outdoor surfaces. Compatible with mobile towers only when the caster stem, frame socket, wheel diameter, braking system, and tower design are matched. Common wheel diameters are approximately 125–200 mm; lift or leveling travel varies by model. Mobile tower requirements may include EN 1004-1, EN 1004-2, OSHA 29 CFR 1926.452(w), and applicable local regulations. Lock all wheels before climbing or working. Use only on firm, level surfaces; maintain the required height-to-base ratio and never move the tower while occupied. Check wheel load rating, brake effectiveness, stem dimensions, swivel function, leveling travel, and compatibility with the tower manufacturer’s instructions.
7. Heavy-Duty Base Jack with Enlarged Plate Large-footprint adjustable jack designed to distribute vertical loads over a wider support area. Heavy-duty shoring, high-load scaffold towers, industrial maintenance platforms, and applications with increased foundation pressure. Compatible with heavy-duty modular or tube-and-fitting systems when the spindle, connector, frame, and bracing are designed for the applied load. Typical base footprints are approximately 150–220 mm or larger; adjustment travel is commonly about 300–600 mm. Require a project-specific design using EN 12811-1, relevant national scaffold rules, and structural checks for foundation pressure and buckling. Install on engineered sole boards or a verified concrete foundation. Keep the jack plumb, limit spindle extension, and provide the specified bracing and tie-ins. Request verified axial capacity, buckling data, plate bearing area, spindle dimensions, material grade, weld inspection records, and coating specification.

Buyer note: Dimensions and adjustment ranges shown are typical market ranges, not universal specifications. Final selection must be based on the complete scaffold or shoring design, verified load calculations, local regulations, ground conditions, and the supplier’s tested installation instructions.

Choosing the Right Jack Base for Different Global Projects

7 Best Scaffold Jack Base Options for Global Buyers

Choosing the Right Jack Base for Different Global Projects

Global projects rarely share identical ground conditions, loads, or scaffold layouts. A 2024 market analysis estimated the global scaffolding market at over USD 60 billion, showing how varied these applications have become. The right jack base must match the project, not merely the supplier’s catalogue.

A fixed screw jack suits level concrete floors and regular access towers. A swivel jack follows uneven slabs and helps reduce frame stress. U-head jacks support beams, formwork, and temporary roof structures. Base plates work well under light-duty frames on prepared surfaces. Heavy-duty adjustable jacks handle greater axial loads, but require verified load tables. Wide-foot jacks reduce settlement on compacted soil. Jack bases with corrosion-resistant finishes fit humid ports and coastal sites better.

Seven options. Different risks.

During field inspections, I have seen threads packed with cement dust and still treated as adjustable. That is a poor assumption. Check thread diameter, adjustment range, locking devices, plate thickness, and tested load capacity. A 2023 safety report from the International Labour Organization identifies construction as one of the highest-risk industries worldwide, while fall-related incidents remain a major concern. Stability begins at the base.

Local standards also matter. European projects may reference EN 12811, while other regions use national scaffold codes. Confirm material certificates and inspection records before shipment. I would not select the cheapest jack. Sometimes, a slightly wider base prevents expensive movement, rework, and uncomfortable questions later.

Article Source: